2/2-way lever valve NO, DN 2

Direct acting 2/2 way solenoid valve, DN 2 for control of neutral gases and liquids. The plunger of the magnetic system is protected by spatial separation from the medium.

Valves of this design are single chamber valves with John Guest® push-fit connections.

The coil system can be customised for common voltage and frequency ranges on request.
Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit.

Due to the use of high quality materials, the valve is applicable for high ambient and medium temperatures.

Ideally suited for dosing applications. The good thermal separation between the fluid path and
solenoid also allows the use of temperature sensitive media, such as in the medical technology or analytics.

Lever Valves 47.00x 2/2-way direct acting NO (normally open) 7 bar 2,1 l/min

Applications

  • Hot / cold drink dispensers
  • Tank or boiler draining
  • Medical engineering
  • Industrial applications
  • Laboratory / analysis equipment

Characteristics

  • Direct acting
  • Medium separated
  • Long term performance capability
  • Works from zero pressure
  • Easy to assemble and service
  • Low power consumption
  • Any fitting position
  • Minimal dead areas in valve body
  • High operating safety through the use of high quality materials and 100% final testing of the products

Options

DN Ø 8 mm Cv-value P Cv-value R
2 John Guest cartridge 2,4 l/min 2,5 l/min
Tubes are to be installed in a way that enduring mechanical tension on in- and outlet connections remain as low as possible!

Technical data

  • Construction lever solenoid valve
  • Ways 2/2-way
  • mode of operation direct acting
  • Function NO (normally open)
  • Fitting position any
  • Media Cold and heated potable water and physically and chemically similar media
  • T-medium 5 - 65 °C
  • T-Ambient 5 - 65 °C
  • DN 2,0 mm
  • Flow factor Kv 2,1 l/min @ 1 bar
  • Pressure range 0 - 7 bar
  • Coil type MS 6
  • Coil Type MS 24
  •   MS 25
  • Nominal voltage 24 V DC
  •   other voltages on request
  • Voltage tolerance +10% -15%
  • Duty cycle 100%
  • Nominal power 8,5 W
  • Protection type IP 00 up to IP 68
  • Coil connections Flat Tabs 6,3 x 0,8 mm according to EN 60529 (IP 00)
  •   Plug Socket according to EN 175301-803 (IP65)
  •   Cable Connections (IP67, IP68)
  • Insulation class H according to EN 60730
  • Protection class I according to EN 60730
  •   (for incorporation in class I)

Materials

  • Valve body PEI
  •   other materials on request
  • Plunger Guide Stainless steel
  • Plunger Stainless steel
  • Membrane EPDM
  •   VMQ (on request)
  • Coil coating PBT or epoxy resin
Technical inquiry
Technical inquiry

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 58 20 40 80
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

©2024 Copyright A. u. K. Müller GmbH & Co. KG