50.013.101 bi

Bi stable cartridge valve, DN 13

2/2-way solenoid cartridge servo controlled valve of DN 13 as latching version, to be used particularly in electronically controlled sanitary fittings.
The valve allows a high flow rate in a compact unit for the control of potable water. Applications like bath-tub filling, shower panels supply or use in urinals can easily be set up.

The valve, equipped with a thread connection, speeds up assembling and disassembly in case of service.
The design of a separate valve seat by the customer is not to apply, as otherwise is needed, if a pilot valve will solely be used.

The rate of flow of the cartridge valve has been optimized in such a way, that the nominal diameter of DN 13 fulfils the standard requirements for sanitary tap ware.

Cartridge- / Sanitary Valves 50.013 bi stable, pulse controlled 10 bar 46 l/min

Applications

  • shower fittings
  • Urinals
  • Bath tub filling

Characteristics

  • Servo-controlled
  • Pre-tested functional unit
  • Long term performance capability
  • Internal triple pollution protection
  • Compact design
  • Optimized water hammer characteristic by low noise emission according to EN 60730
  • Easy to assemble and service
  • Standard connection
  • Cylindrical design
  • Low power consumption
  • Any fitting position
  • Suitable for spray- and jet water
  • High operating safety through the use of high quality material and hygiene benefit by 100% final testing with air

Options

Connection type Standard cable length
With leads and connector 85 ±5 mm
Others on request
Polarity of connector:  
strand color RED Pin 1 PLUS(+) pulse to open
strand color BLACK MINUS(-)

Technical data

  • Type cartridge valve
  • Construction 2/2-way; screw-in; servo controlled;
  • Function bi stable, pulse controlled
  • Fitting position any
  • Media Cold and heated potable water and physically and chemically similar media
  • T-Medium 5 - 70 °C
  • T-Ambient 5 - 60 °C
  • DN 13,0 mm
  • Pressure range 0,5 - 10,0 bar
  • Flow factor Kv 46 l/min @ 1 bar
  • Nominal voltage 6 V DC
  • Nominal voltages 9 V DC on request
  • Operating voltage 4,7 - 7,5 V DC open/close at T-Ambient 25°C
  • Nominal power 1,8 W
  • Protection Type IP 65
  • Protection type higher IP-classes on request
  • Insulation class B according to EN 60730
  • Protection Class III according to EN 60730

Materials

  • Valve body PA 66, glass fibre reinforced
  • Plunger Guide LCP
  • Plunger and spring stainless steel
  • Membrane and sealings EPDM
  • Coil coating Hotmelt
  • Filter (in inlet) on request
Technical inquiry
Technical inquiry

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 58 20 40 80
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

©2024 Copyright A. u. K. Müller GmbH & Co. KG