U9x.60x.-
Medical Technology

Dialysis valve, direct acting, NC

This valve series has been specially developed for use in haemodialysis machines and other medical devices. The design recognizes the specific requirements of this market.

Used as an inlet or outlet valve for the balance chamber of a dialysis machine, the valve will work in both flow directions across the complete pressure range.

A variety of standard bodies are available to connect to the customer’s balance chamber but customised versions can be produced.

The use of high quality plastics and sealing elements made of EPDM or FKM ensure durability even with aggressive media such as dialysate, cleaning agents and disinfectants.

The PTFE Bellows ensure a longer lifetime than a rubber membrane as it is less likely to become brittle.
All materials meet EU, RoHS and REACH regulations.

Direct Acting Valves U9x.60x 2/2-way 3/2-way direct acting NC (normally closed) NO (normally open) on request 400 kPa
Technical inquiry Data sheet
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC
Dialysis valve, direct acting, NC

Applications

  • Haemodialysis machines
  • Medical engineering
  • Water treatment
  • Disinfection equipment

Characteristics

  • Special valve for haemodialysis machines
  • Medium separated by PTFE bellow
  • Function and leak tightness in both flow directions
  • Plunger guided by PTFE
  • High flow rate
  • Various fixing options
  • Suitable for pressure and vacuum operation
  • Short cycle types
  • High number of ON-OFF cycles
  • Minimal dead areas in valve body
  • Easy chemical disinfektion
  • Materials with worldwide approvals
  • High operating safety by the use of high quality materials
  • Low power consumption
  • CE-Marking
  • UL and CSA certification on request

Options

Variant Length Height ID
DN øA A1 øB B1 øC C1 L H
I 3,6 7,1 Nozzle 13 7,1 Nozzle 13 - - 49,5 85,5 81050
III 3,6 7,1 Nozzle 13 - - - - 37 85,5 81054
III 3,6 7,1 Nozzle 13 - - - - 39 85,5 81055
IV 3,6 7,3 Nozzle 13,5 7,3 Nozzle 19 7,5 Nozzle 16 57 85,5 81066
V 4 7,1 Nozzle 14 6,3 2,5 - - 49 87 81070
VI 4 7,1 Nozzle 14 7,1 Nozzle 14 - - 61 87 81071
VII 4 7,1 Nozzle 14 6,1 1,8 - - 49 87 81072
VIII 3,6 8,0 Nozzle* 19 8,0 Nozzle* 19 - - 62,5 85,5 on request
IX 3,6 7,3 Nozzle 19 7,3 Nozzle 13,5 - - 57 85,5 on request
* Applicable for John Guest connection.

Technical data

  • Type solenoid valve for dialysis machines
  • Construction single chamber straight valve
  • Ways 2/2-way
  •   3/2-way
  • mode of operation direct acting
  • Function NC (normally closed)
  •   NO (normally open) on request
  • Fitting position any
  • Media Water
  •   dialysis fluid or desinfection solutions
  • T-Medium 5 - 90 °C (194 °F max.)
  • T-Ambient 5 - 70 °C (41 - 158 °F)
  •   (60 °C max. on coils MS.024, MS.025)
  • DN 3,6 mm
  •   4,0 mm
  • Pressure range 10 -400 kPa (abs) both flow directions
  • Flow factor Kv DN 3,6 3,2 l/min
  • Flow factor Kv DN 4,0 4,2 l/min
  • Coil type MS 6
  • Coil Type MS 24
  •   MS 25
  • Nominal voltage 24 V DC
  •   other voltages on request
  • Voltage tolerance ±10%
  • Duty cycle 100%
  • Nominal power 9,5 W
  • Protection Type IP 00 up to IP 65 according to EN 60529
  • Coil connections Flat Tabs 6,3 x 0,8 mm according to EN 60529 (IP 00)
  •   Plug Socket according to EN 175301-803 (IP65)
  •   Several Cable Connections (IP65)
  • Insulation class H according to EN 60730
  • Protection Class III according to EN 60730
  • Protection class (for incorporation in class I)

Materials

  • Valve body PEI
  •   PPSU on request
  •   PEEK on request
  • Plunger Guide PTFE
  • Plunger and spring stainless steel
  • Bellow PTFE
  • Seal Swivel nut EPDM
  • Seal FKM on request
  • Coil coating PBT, PET or epoxy resin
Technical inquiry
Technical inquiry

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 58 20 40 80
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

Business Sectors
Products
Services
News
A. u. K. Müller
Information
Linkedin Linkedin Xing
©2024 Copyright A. u. K. Müller GmbH & Co. KG