50.007.101 mono M29

Mono stable cartridge valve, DN 7, thread M29 x 1,5

2/2-way solenoid cartridge servo controlled valve of DN?7 in mono stable version, to be used particularly in electronically controlled sanitary fittings.

The design outline had been reduced so far, that integration in appropriate components while using a minimum amount of space, is given.
Positive properties are extended due to the simple “screw in” version, which supports easy assembly, service and tests by the customer.
The design of a separate valve seat by the customer is not to apply, as otherwise is needed, if a pilot valve will solely be used.

The flow rate of the cartridge valve has been optimized in such a way, that the nominal diameter of DN?7 fulfils the standard requirements for sanitary tap ware. In addition, we offer a version that has been optimized against water hammer according to EN 60730-2-8.

By using our special valve bodys, an extended variety of application can be achieved (see data sheet 50.007.126 or 50.007.52x).

Cartridge- / Sanitary Valves 50.007 2/2-way servo-controlled NC (normally closed) 10 bar

Applications

  • Sanitary fittings
  • Irrigation systems
  • Industrial appliances

Characteristics

  • Servo-controlled
  • Pre-tested functional unit
  • Long term performance capability
  • Internal triple pollution protection
  • Compact design
  • Optimized Cv-value for DN 7
  • Optimized water hammer characteristic by low noise emission according to EN 60730
  • Easy to assemble and service
  • Standard connection
  • Cylindrical design
  • Low power consumption
  • Any fitting position
  • Suitable for spray- and jet water
  • High operating safety through the use of high quality material and hygiene benefit by 100% final testing with air
  • Good resistance to thermal (e.g., T-medium 80 ° C / 10 minutes) and chemical disinfection.

Options

Connection type standard cable length
with leads and connector 95 +/- 5 mm
others on request
Male connector:
strand color RED Pin 1 PLUS (+) pulse to open
strand color BLUE MINUS (-)

Technical data

  • Type cartridge valve
  • Construction screw-in
  • Ways 2/2-way
  • mode of operation servo-controlled
  • Function NC (normally closed)
  • Connection thread M29 x 1,5
  • Fitting position any
  • Media Cold and heated potable water and physically and chemically similar media
  • T-Medium 5 - 70 °C
  • T-Ambient 5 - 60 °C
  • DN 7,0 mm
  • Pressure range 0,5 - 10,0 bar
  • Flow factor Kv 22.3 l/min @1 bar
  • Pressure surge according to EN 60730
  • Burst pressure according to EN 60730
  • Nominal voltage 12 V DC
  •   24 V DC
  •   other voltages on request
  • Voltage tolerance +10% -15%
  • Duty cycle 100%
  • Nominal power 1,7 W (12 V DC)
  •   1,8 W (24 V DC)
  • Protection Type IP 65
  • Protection type higher IP-classes on request
  • Insulation class B according to EN 60730

Materials

  • Valve body PA 6/6
  • Seal retainer PPSU
  • Plunger Guide LCP
  • Plunger Stainless steel
  • Membrane and sealings EPDM
  • Filter stainless steel (in inlet)

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 58 20 40 80
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

©2024 Copyright A. u. K. Müller GmbH & Co. KG