50.009.101 mono M29

Monostable cartridge valve, DN 9

2/2-way solenoid cartridge servo controlled valve of DN 9 in monostable version, to be used particularly in electronically controlled sanitary fittings.

The design outline had been reduced so far, that integration in appropriate components while using a minimum amount of space, is given.
Positive properties are extended due to the simple “screw in” version, which supports easy assembly, service and tests by the customer.
The design of a separate valve seat by the customer is not required, as otherwise needed when solely using a pilot valve.

The rate of flow of the cartridge valve has been optimised in such a way, that the nominal diameter of DN 9 fulfils the standard requirements for sanitary tap ware.

By using our special valve bodies, an extended variety of attachment combinations can be achieved (see data sheet 50.009.126).

Cartridge- / Sanitary Valves 50.009 2/2-way servo-controlled NC (normally closed) 10 bar 24 l/min

Applications

  • Sanitary fittings
  • Irrigation systems
  • Industrial equipment

Characteristics

  • Servo-controlled
  • Pre-tested functional unit
  • Long term performance capability
  • Internal triple pollution protection
  • Compact design
  • Optimized water hammer characteristic by low noise emission according to EN 60730
  • Easy to assemble and service
  • Standard connection
  • Cylindrical design
  • Low power consumption
  • Any fitting position
  • Suitable for spray- and jet water
  • High operating safety through the use of high quality material and hygiene benefit by 100% final testing with air
  • Good resistance to thermal (e.g., T-medium 80 ° C / 10 minutes) and chemical disinfection.

Options

Connection type standard cable length
with leads and connector 95 +/- 5 mm
others on request
Male connector:
strand color RED Pin 1 PLUS (+) pulse to open
strand color BLUE MINUS (-)

Technical data

  • Type cartridge valve
  • Construction screw-in
  • Ways 2/2-way
  • mode of operation servo-controlled
  • Function NC (normally closed)
  • Connection thread M29 x 1,5
  • Fitting position any
  • Media Cold and heated potable water and physically and chemically similar media
  • T-Medium 5 - 70 °C
  • T-Ambient 5 - 60 °C
  • DN 9 mm
  • Pressure range 0,5 - 10,0 bar
  • Flow factor Kv 24 l/min @ 1 bar
  • Pressure surge according to EN 60730
  • Burst pressure according to EN 60730
  • Nominal voltage 12 V DC
  •   24 V DC
  •   other voltages on request
  • Voltage tolerance +10% -15%
  • Duty cycle 100%
  • Nominal power 1,7 W (12 V DC)
  •   1,8 W (24 V DC)
  • Protection Type IP 65
  • Protection type higher IP-classes on request
  • Insulation class B according to EN 60730

Materials

  • Valve body PA 6/6
  • Seal retainer PPSU
  • Plunger Guide LCP
  • Plunger Stainless steel
  • Membrane and sealings EPDM
  • Filter stainless steel (in inlet)
Technical inquiry
Technical inquiry

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 50 34 23 61
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

©2022 Copyright A. u. K. Müller GmbH & Co. KG