Servo-continuous Valve

This valve is a servo-controlled 2/2-way valve of the nominal width DN 9 with continuously variable stroke.
It is suitable for setting up controlled systems, for low flow values including complete shut-off function.

The great advantage of this valve is the magnetic coupling of valve drive and actuating element.
The actuating element located on the pressure side of the valve is thus hermetically separated from the valve drive by a static seal.
A wear-prone dynamic seal is therefore no longer necessary and leakages are thus excluded at this point.

The valve is specially designed for applications where the flow must be controlled continuously. In this way, the flow rate can be easily regulated depending on the required withdrawal quantity.

It can also be used as a line regulating valve in heating systems, which automatically regulates the underfloor heating depending on the room air temperature, measured at any point in the room.

Control and Regulating Valves, Flow Sensors, Metrology 10.009 continuously adjustable stroke 10 bar

Applications

  • Thermostatically controlled heating system
  • Instant flash heater
  • Hot / cold drink dispensers
  • Industrial appliances
  • Air conditioning
  • Agricultural implements
  • Cleaning systems
  • Temperature control devices
  • Dish washers
  • Washing machines
  • Water treatment installations

Characteristics

  • Stepper motor controlled valve
  • stepper motor, medium separated
  • Wear-resistant due to magnetic coupling
  • Suitable for continuous operation
  • Medium temperature up to 90°C
  • No water hammer
  • Long term performance capability by the use of high quality materials
  • Hygiene benefit by 100% final testing with air

Options

Material Inlet Outlet Length Height Cable ID
Ø A A1 [mm] Ø B B1 [mm] L [mm] H [mm] K [mm]
PA 66 G 1/2 15 G 1/2 15 66 93 440 other cable lengths on request 064100
PA 66 G 3/4 18 G 3/4 18 72 93 on request
PA 66 3/4-11,5NH 18 3/4-11,5NH 18 72 93 on request

Technical data

  • Type stepper motorized valve
  • Function continuously adjustable stroke
  • Fitting position any, preferably actor upwards
  • Media potable water and physically and chemically similar media
  • Construction 2/2-way single chamber straight valve, direct acting
  • T-Medium 5 - 90 °C
  • T-Ambient 5 - 60 °C
  • DN 9 mm
  • Flow factor Kv 18 l/min @ 1 bar (completely open)
  • Pressure range 0,5 - 10,0 bar
  • Actuator Type stepper motor unipolar
  • steps 400 (open - closed)
  • Nominal voltage 12 V DC
  •   other voltages on request
  • Duty cycle 100%
  • Protection type IP 00
  • Insulation class B according to EN 60730

Materials

  • Valve body PA 66, glass fibre reinforced
  •   PPE on request
  • Retention gland PA 66 glass fibre reinforced on request
  • Seal EPDM
Technical inquiry
Technical inquiry

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 58 20 40 80
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

©2024 Copyright A. u. K. Müller GmbH & Co. KG