01.010.126

Servo-controlled Solenoid Valve NC, DN 10, Straight Valve

2/2-way solenoid valve of nominal diameter DN 10 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC).

Valves of this design are single chamber straight valves and can be manufactured with various connections.
Coil systems for common voltage and frequency ranges are available.

Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit.

By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel.

Solenoid Valves 01.010 2/2-way servo-controlled NC (normally closed) 10 bar 21 l/min

Applications

  • Steam appliances
  • Dental appliances
  • Hot / cold drink dispensers
  • Industrial appliances
  • Air conditioning
  • Agricultural implements
  • Cleaning systems
  • Temperature equalisers
  • Dish washers
  • Ice machines
  • Washing machines
  • Water treatment installations

Characteristics

  • Servo-controlled
  • Normally closed (NC)
  • Solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4 x 90°
  • Suitable for hot water up to 90°C
  • Similar hydraulic performance for AC or DC types
  • Optimized water hammer characteristic by low noise emission according to EN 60730
  • Long term performance capability
  • High operating safety through the use of high quality materials and 100% final testing of the products

Options

Material Inlet Outlet Length Height Depth
Ø A A1 Ø B B1 L H T
PA 66 or PA6/6 G 3/4 18 G 3/4 18 76 79 36
PA 66 or PA6/6 G 1/2 15 G 1/2 15 70 79 36
PA 66 or PA6/6 G 3/8 13 G 3/8 13 66 79 36
PA 66 or PA6/6 G 3/4 18 G 1/2 15 73 79 36
PA 66 or PA6/6 G 3/4 18 G 3/8 13 71 79 36
PA 66 G 1/2 15 G 3/4 18 73 79 36
PA 66 G 1/2 15 G 3/8 13 68 79 36
PA 66 G 3/8 13 G 3/4 18 71 79 36
PA 66 G 3/8 13 G 1/2 15 68 79 36
PA 66 or PA6/6 G 3/4 (no fixing clip possible) 10 G 3/4 10 55 79 36
PPE G 3/8 13 G 3/8 13 66 79 36
PA 66 G 3/4 18 G 3/4 10 68 79 36
PA 66 or PA6/6 G 3/8 13 12,0 nozzle 17 70 79 36
PPE 12,0 nozzle 17 12,0 nozzle 17 74 79 36
PA 66 or PA6/6 G 3/4 14,5 G 3/4 14,5 69 79 36
PA 66 G 3/4 18 G 3/4 swivel nut 10,5 87 79 36
PA 66 G 3/4 swivel nut 10,5 G 3/4 18 87 79 36
PA 66 G 3/8 13 G 3/4 swivel nut 10,5 82 79 36
PA 66 G 3/4 18 12,0 nozzle 17 75 79 36
PA 66 G 3/4 18 15,0 nozzle* 30 90 79 36
PA 66 15,0 nozzle* 30 G 3/4 18 88 79 36
PPE G 1/2 15 G 1/2 15 70 79 36
PPE G 3/4 18 G 3/4 18 76 79 36
PA 66 3/8" JG** 10 3/8" JG** 10 60 79 36
PA 6/6 G 3/4 swivel nut 10,5 G 3/4 swivel nut 10,5 99 79 36
PA 6/6 G 1/2 swivel nut 11,5 G 1/2 swivel nut 11,5 99 79 36
PA 6/6 G 1/2 female 16 G 1/2 female 16 76 79 36
* Compatible to modular fitting system, series 11.000 or for John Guest
**John Guest cartridge in valve body
Other variants on request.

Technical data

  • Type solenoid valve
  • Construction single chamber straight valve
  • Ways 2/2-way
  • mode of operation servo-controlled
  • Function NC (normally closed)
  • Fitting position any, preferably with coil upwards
  • Media Cold and heated potable water and physically and chemically similar media
  • T-Medium 5 - 90 °C (194 °F max.)
  • T-Ambient 5 - 70 °C (41 - 158 °F)
  •   (60 °C max. USA and coils MS.024, MS.025)
  • DN 10,0 mm
  • Pressure range 0,2 - 10 bar
  • Flow factor Kv 21 l/min @ 1 bar
  • Flow regulator on request
  • Pressure surge according to EN 60730
  • Coil type MS 6
  • Coil Type MS 24
  •   MS 25
  • Nominal voltage 220-240 V AC 50-60 Hz
  •   110 V AC 50 Hz
  •   110 - 127 V AC 60 Hz
  •   24 V AC 50/60 Hz
  •   12 V AC 50/60 Hz
  •   24 V DC
  •   12 V DC
  •   other voltages on request
  • Voltage tolerance +10% -15%
  • Duty cycle 100%
  • Nominal power 12,8 W 13 VA (AC only)
  • Protection type IP 00 up to IP 68
  • Coil connections Flat Tabs 6,3 x 0,8 mm according to EN 60529 (IP 00)
  •   Plug Socket according to EN 175301-803 (IP65)
  •   Cable Connections (IP67, IP68)
  • Insulation class H according to EN 60730
  • Protection class I according to EN 60730
  •   (for incorporation in class I)

Materials

  • Valve body PA 6/6, glass fibre reinforced
  •   PA 66, glass fibre reinforced
  •   PPE on request
  •   PEI on request (T-medium max. 30 °C)
  • Plunger Guide Stainless steel
  • Plunger and spring stainless steel
  • Membrane and sealings EPDM
  •   NBR (on request)
  •   VMQ (on request)
  • Coil coating PBT, PET or epoxy resin
  • Filter (in inlet) Stainless steel
  • Filter POM on request

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 58 20 40 80
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

©2024 Copyright A. u. K. Müller GmbH & Co. KG