36.010.126_A
Industry

Solenoid Valve NO (normally open), DN10, male thread

2/2-way solenoid valve of nominal diameter DN 10 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally open (NO).

Valves of this design are single chamber straight valves and can be manufactured with various connections.
Coil systems for common voltage and frequency ranges are available.

The electrical operational safety is guaranteed by the electrical insulation coordination, which corresponds to the VDE 110 regulations, and can be additionally supported by internal protective circuits. The manufacturing process includes a 100% electrical safety test in accordance with the VDE 0631 Part 1000 regulations.

By using high quality insulation materials, continuous duty (100 % ED) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel.

Solenoid Valves, NO normally open 36.010 2/2-way servo-controlled NO (normally open) 10 bar 20 l/min
Technical inquiry Data sheet
Solenoid Valve NO (normally open), DN10, male thread

Applications

  • Steam appliances
  • Dental appliances
  • Hot / cold drink dispensers
  • Industrial appliances
  • Air conditioning
  • agricultural devices
  • Cleaning systems
  • Temperature equalisers
  • Dish washers
  • Ice machines
  • Washing machines
  • Water treatment installations

Characteristics

  • Servo-controlled
  • normally open (NO)
  • Solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4 x 90°
  • Medium temperature up to 90°C
  • Similar hydraulic performance for AC or DC types
  • Optimized water hammer characteristic by low noise emission according to EN 60730
  • Long term performance capability
  • High operating safety through the use of high quality materials and 100% final testing of the products

Options

Material Inlet Fixing Groove Outlet Length Height Depth
Ø A A1 Ø B B1 L H T
PA 66 or PA6/6 or PPO black G 3/4 18 yes G 3/4 18 76 79 36
PA 66 or PA6/6 or PPO black G 1/2 15 yes G 1/2 15 70 79 36
PA 66 or PA6/6 or PPO G 3/8 13 yes G 3/8 13 66 79 36
PA 66 or PA6/6 G 3/4 18 yes G 1/2 15 73 79 36
PA 66 or PA6/6 G 3/4 18 yes G 3/8 13 71 79 36
PA 66 G 1/2 15 yes G 3/4 18 73 79 36
PA 66 G 1/2 15 yes G 3/8 13 68 79 36
PA 66 G 3/8 13 yes G 3/4 18 71 79 36
PA 66 G 3/8 13 yes G 1/2 15 68 79 36
PA 66 or PA6/6 G 3/4 10 no G 3/4 10 55 79 36
PA 66 G 3/4 18 yes G 3/4 10 68 79 36
PA 6/6 G 3/8 13 yes 12,0 nozzle 17 70 79 36
PPO or PA 66 12,0 nozzle 17 yes 12,0 nozzle 17 74 79 36
PA 66 or PA 6/6 G 3/4 14,5 yes G 3/4 14,5 69 79 36
PA 6/6 G 3/4 18 yes G 3/4 swivel nut 10,5 87 79 36
PA 66 G 3/4 swivel nut 10,5 yes G 3/4 18 87 79 36
PA 66 G 3/4 18 yes 15,0 nozzle* 30 90 79 36
PPO black G 1/2 15 yes G 1/2 15 70 79 36
PPO black G 3/4 18 yes G 3/4 18 76 79 36
PA 66 3/8" JG** 10 yes 3/8" JG** 10 60 79 36
* Compatible to modular fitting system, series 11.000 or for John Guest
**John Guest cartridge in valve body
Other variants on request.

Technical data

  • Construction single chamber straight valve
  • Ways 2/2-way
  • mode of operation servo-controlled
  • Function NO (normally open)
  • Fitting position any, preferably with coil upwards
  • Media Cold and heated potable water and physically and chemically similar media
  • T-Medium 5 - 90 °C (194 °F max.)
  • T-Ambient 5 - 70 °C (41 - 158 °F)
  • DN 10,0 mm
  • Pressure range 0,5 - 10,0 bar
  • Flow factor Kv 20 l/min @ 1 bar
  • Flow regulator on request
  • Pressure surge according to EN 60730
  • Coil type MS 6
  • Coil Type MS 24
  •   MS 25
  • Nominal voltage 220-240 V AC 50-60 Hz
  •   24 V DC
  •   other voltages on request
  • Voltage tolerance +10% -15%
  • Duty cycle 100%
  • Nominal power 8,5 W 13 VA (nur AC)
  • Protection type IP 00 up to IP 68
  • Coil connections Flat Tabs 6,3 x 0,8 mm according to EN 60529 (IP 00)
  •   Plug Socket according to EN 175301-803 (IP65)
  •   Cable Connections (IP67, IP68)
  • Insulation class H according to EN 60730
  • Protection class (for incorporation in class I)

Materials

  • Valve body PA 6/6, glass fibre reinforced
  •   PPE on request
  •   PEI on request (T-medium max. 30 °C)
  • Plunger Guide Stainless steel
  • Plunger and spring stainless steel
  • Membrane and sealings EPDM
  •   NBR (on request)
  •   VMQ (on request)
  • Coil coating PBT, PET or epoxy resin
  • Filter stainless steel (in inlet)
  •   POM on request
Technical inquiry
Technical inquiry

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 58 20 40 80
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

Business Sectors
Products
Services
News
A. u. K. Müller
Information
Linkedin Linkedin Xing
©2024 Copyright A. u. K. Müller GmbH & Co. KG