13.007.226
Vending Industry

Aquastop

Two single servo-controlled valves, mounted in line. Both chambers are normally closed and have a DN 7 orifice size.

Connected between the water supply and a machine to be charged, the Aquastop prevents water damage to floors and walls in both domestic and commercial property.

The outer corrugated tube returns even very minor leaks in the inner flexible inlet hose back into the appliance where it is detected by a sensor.

The sensor signal, received by the appliances controller, shuts the water supply before any major damage can occur.

Different AC or DC voltages are available. Length of tubes, cable or connectors can be tailored to customer specification.

Solenoid Valves 13.007 2/2-way servo-controlled NC (normally closed) 10 bar 8 l/min
Technical inquiry Data sheet
Aquastop

Applications

  • coffee machines
  • beverage distributors for hot and cold drinks
  • potable water dispenser

Characteristics

  • two single servo-controlled compact valves (NC) to increase operational reliability
  • connection to water supply(swivel nut) possible without tool
  • water supply tube routed in flexible corrugated tube
  • flexible corrugated tube to guide leakage medium to directed recirculation
  • prefiltration in inlet
  • flow regulator retainer in inlet
  • suitable for warm water up to 60° C (EU, UK)(USA: 90°C)
  • electrical operating safety due to two component resin encapsulated solenoids
  • High operating safety through the use of high quality materials and 100% final testing of the products
  • Low power consumption

Options

Design for Inlet Corrugated tube Inlet tube Cable Height Depth Cable type Tm / °C Approval
ØA A1 L1 L2 L3 H T (Status)
EU G 3/4 female gland nut 12 1300 2200 1400 71 40 H03VVH2-F 0,75mm^2 60 VDE Cert. No. 40016187 Materials in touch with medium accordant to KTW recommendation *)
EU G 3/4 female gland nut 12 1800 2700 1900 71 40 H03VVH2-F 0,75mm^2 60 VDE Cert. No. 40016187 Materials in touch with medium accordant to KTW recommendation *)
USA .75-11.5 female gland nut 12 1300 2200 1400 71 40 AWM: 3289 / CSA: CL 1503 AWG 18 90 UL: YIOZ2/8.MH13874 NSF Cert.-No.: N13.007
USA .75-11.5 female gland nut 12 1800 2700 1900 71 40 AWM: 3289 / CSA: CL 1503 AWG 18 90 UL: YIOZ2/8.MH13874 NSF Cert.-No.: N13.007
UK G 3/4 female gland nut 12 1300 2200 1400 71 40 H03VVH2-F 0,75mm^2 60 WRAS Cert.-No.: 0909800
UK G 3/4 female gland nut 12 1800 2700 1900 71 40 H03VVH2-F 0,75mm^2 60 WRAS Cert.-No.: 0909800
*) Inlet tube: operating temperature 60 °C KTW-approval for cold water 20°C

Technical data

  • Type two solenoid valves
  • Construction valves, mounted in line, compact
  • Ways 2/2-way
  • mode of operation servo-controlled
  • Function NC (normally closed)
  • Inlet G 3/4 or .75-11,5NH
  • Fitting position any
  • Media Cold and heated potable water and physically and chemically similar media
  • T-Medium see table above (Tm)
  • T-Ambient 5 - 60 °C (41 - 140) °C (°F)
  • DN 7,0 mm
  • Pressure range 0,2 - 10 bar
  • Flow factor Kv 8 l/min @ 1 bar
  • Pressure surge according to EN 60730
  • Coil type MS 26
  • Nominal voltage 12 V DC
  •   24 V DC
  •   12 V AC 50/60 Hz
  •   110 - 127 V AC 60 Hz
  •   110 V AC 50 Hz
  •   220-240 V AC 50-60 Hz
  • Voltage tolerance +10% -15%
  • Duty cycle 100%
  • Nominal power 10,0 W / 15,0 VA (only AC)
  •   13,5 W (only DC)
  • Protection type IP 65 (housing)
  • Electrical connection AMP 180908
  • Insulation class H according to EN 60730
  • Protection class qualified for incorporation in class I according to EN 60730

Materials

  • Protection cover PP coulor RAL 7035 light grey
  • Valve body PPE
  •   PVDF
  •   Stainless Steel
  •   PA 6/6
  • Plunger Guide Stainless steel
  • Plunger and spring stainless steel
  • Membrane and sealings EPDM
  •   (FKM USA)
  •   VMQ (on request)
  • Coil coating PU potting
  • Flexible inlet tube EU: PVC
  •   USA: TPE/Polyester meshwork
  •   UK: Eva/LDPE & XT
  • Corrugated tube LDPE (low density Polyethylene)
  • Filter Stainless steel
Technical inquiry
Technical inquiry

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 58 20 40 80
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

Business Sectors
Products
Services
News
A. u. K. Müller
Information
Linkedin Linkedin Xing
©2024 Copyright A. u. K. Müller GmbH & Co. KG