46.008.101
Vending

Dispense valve, DN 8

2/2-way solenoid valve, DN 8, direct controlled. This valve is normally closed (NC).

Valves of this type are medium separated seat valves, where the plunger is separated by a diaphragm from the medium. The valve housing and outlet nozzle are a single piece moulding.

This valve can be manufactured with a variety of customised connections in DC or AC voltage. Low power or PPM triggering can be used.

Electrical operating safety is achieved by PBT coating of the coil and can additionally be supported by an internal protection circuit.

The valve is available in different PSU valve housing types and is distinguished primarily by its food grade and hot water capability.

Low-pressure Drain Valves 46.008 2/2-way direct acting NC (normally closed) 60 mbar
Technical inquiry Data sheet
Dispense valve, DN 8
Dispense valve, DN 8
Dispense valve, DN 8
Dispense valve, DN 8

Applications

  • Hot / cold drink dispensers
  • Tank or boiler draining
  • automatic animal feeding equipment

Characteristics

  • Direct acting
  • internal plunger assembly medium separated
  • Long term performance capability
  • flow rate adjustable (flow regulation screw)
  • Suitable for food and hot water appliances
  • No minimal pressure required
  • Similar hydraulic performance for AC or DC types
  • other hydraulic connections on request
  • complete drainage of valve outlet after shut off
  • Easy to assemble and service
  • Coil change without opening of medium circuit, coil can be mounted 4 x 90°
  • High operating safety through the use of high quality materials and 100% final testing of the products
  • certificates: UL, NSF, WRAS

Technical data

  • Type dispense valve
  • Construction single-chamber valve inlet ninety degree to outlet
  • Ways 2/2-way
  • mode of operation direct acting
  • Function NC (normally closed)
  • Fitting position with coil pointing upwards
  • Media Cold and heated potable water and physically and chemically similar media
  • T-Medium 5 - 98 °C
  • T-Ambient 5 - 70 °C (41 - 158 °F)
  • DN 8,0 mm (0.315 inch)
  • Flow adjustable at outlet nozzle
  • Pressure range 0 - 60 mbar
  • Coil type MS 6
  • Nominal voltage 230 V AC 50/60 Hz
  •   110 V AC 50/60 Hz
  •   24 V AC 50/60 Hz
  •   24 V DC
  •   other voltages on request
  • Voltage tolerance +10% -15%
  • Duty cycle AC 50% (cycle 1 min)
  •   DC 100%
  • Nominal power 9,5 W 16,4 VA (AC only)
  • Protection type IP 00
  •   higher IP-classes on request
  • Coil connections Flat Tabs 6,3 x 0,8 mm according to EN 60529 (IP 00)
  •   Other Connections on Request
  • Insulation class H according to EN 60730
  • Protection class I according to EN 60730
  •   (for incorporation in class I)

Materials

  • Valve body PSU
  • Plunger Guide Stainless steel
  • Plunger Stainless steel
  • Membrane VMQ
  •   FMQ (on request)
  • Sealings VMQ
  • Coil coating PBT, PET or epoxy resin
Technical inquiry
Technical inquiry

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 58 20 40 80
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

Business Sectors
Products
Services
News
A. u. K. Müller
Information
Linkedin Linkedin Xing
©2024 Copyright A. u. K. Müller GmbH & Co. KG