01.017.115

Servo-controlled Solenoid Valve NC, DN 17, Angle Valve

2/2-way solenoid valve of nominal diameter DN 17 for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed (NC).

Valves of this design are single chamber valves with the inlet ninety degrees to the outlet and can be manufactured with various connections.
Coil systems for common voltage and frequency ranges are available.

Electrical operating safety is achieved by insulation class F and can be supported by an integrated protective circuit.

By using high quality insulation materials, continuous operation (100% duty cycle) at higher medium temperatures is possible. The glass fibre reinforced polyamide valve body persists hot water. Protection against corrosion of inner parts exposed to the medium is achieved by using stainless steel.

Solenoid Valves 01.017 2/2-way servo-controlled NC (normally closed) 10 bar 70 l/min

Applications

  • Steam appliances
  • Dental appliances
  • Hot / cold drink dispensers
  • Industrial appliances
  • Air conditioning
  • Agricultural implements
  • Cleaning systems
  • Temperature equalisers
  • Dish washers
  • Ice machines
  • Washing machines
  • Water treatment installations

Characteristics

  • Servo-controlled
  • Normally closed (NC)
  • Solenoid replaceable while medium circuit remains untouched, solenoid rotatable 4 x 90°
  • Suitable for hot water up to 90°C
  • Similar hydraulic performance for AC or DC types
  • Optimized water hammer characteristic by low noise emission according to EN 60730
  • Long term performance capability
  • High operating safety through the use of high quality materials and 100% final testing of the products

Options

Material Inlet Outlet Length Height Depth
Ø A A1 Ø B B1 L H T
PA 66 G 3/4 20,0 G 3/4 20,0 77,0 106,0 52,0
PA 66 G 3/4 20,0 21,5 nozzle 34,0 77,0 120,0 52,0

Technical data

  • Type solenoid valve
  • Construction single-chamber valve inlet ninety degree to outlet
  • Ways 2/2-way
  • mode of operation servo-controlled
  • Function NC (normally closed)
  • Fitting position any, preferably with coil upwards
  • Media Cold and heated potable water and physically and chemically similar media
  • T-Medium 5 - 90 °C (194 °F max.)
  • T-Ambient 5 - 70 °C (41 - 158 °F)
  •   (60 °C max. USA and coils MS.024, MS.025)
  • DN 17,0 mm
  • Pressure range 0,3 - 10 bar
  • Flow factor Kv 70 l/min @ 1 bar
  • Max. flow rate 81 l/min (26.4 gpm) (to be limited externally according to EN 60730-2-8 at max. operating parameters)
  • Flow regulator on request
  • Pressure surge according to EN 60730
  • Coil type MS 6
  • Coil Type MS 24
  •   MS 25
  • Nominal voltage 220-240 V AC 50-60 Hz
  •   110 V AC 50 Hz
  •   110 - 127 V AC 60 Hz
  •   24 V AC 50/60 Hz
  •   12 V AC 50/60 Hz
  •   24 V DC
  •   12 V DC
  •   other voltages on request
  • Voltage tolerance +10% -15%
  • Duty cycle 100%
  • Nominal power 8,5 W 13 VA (nur AC)
  • Protection type IP 00 up to IP 68
  • Coil connections Flat Tabs 6,3 x 0,8 mm according to EN 60529 (IP 00)
  •   Plug Socket according to EN 175301-803 (IP65)
  •   Cable Connections (IP67, IP68)
  • Insulation class H according to EN 60730
  • Protection class I according to EN 60730
  •   (for incorporation in class I)

Materials

  • Valve body PA 66, glass fibre reinforced
  • Plunger Guide Stainless steel
  • Plunger and spring stainless steel
  • Membrane and sealings EPDM
  • Coil coating PBT, PET or epoxy resin
  • Filter (in inlet) Stainless steel
  •   POM on request
Technical inquiry
Technical inquiry

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788 888
Fax:+44 1903 785 817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm26D, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 58 20 40 80
Telefax:  +86 21 58 20 42 12

E-Mail: info(at)akmueller.de

 

 

©2023 Copyright A. u. K. Müller GmbH & Co. KG