40.014.111

Dispense valve, DN 14

2/2-way solenoid valve of nominal diameter DN 12 for liquid dispense. This valve is direct controlled and normally closed (NC).

Valves of this design are medium separated seat valves, where the plunger is separated by a diaphragm from the medium. The valve seat is made of scale build up inhibiting PTFE.

This valve can be manufactured with a variety of customised connections in DC or AC voltage. Low power or PPM triggering can be used.

Electrical operating safety is achieved by PBT coating of the coil and can be supported by an additional protection circuit.

The valve is available in different PSU valve body types and is distinguished primarily by its food grade and hot water capability.

Low-pressure Drain Valves 40.014 2/2-way direct acting NC (normally closed) 60 mbar

Applications

  • Hot / cold drink dispensers
  • Tank or boiler draining
  • automatic animal feeding equipment

Characteristics

  • Direct acting
  • plunger separated by membrane from medium
  • PTFE valve seat to inhibit scale build up
  • Long term performance capability
  • Suitable for food and hot water appliances
  • No minimal pressure required
  • Similar hydraulic performance for AC or DC types
  • other hydraulic connections on request
  • complete drainage of valve outlet after shut off
  • Easy to assemble and service
  • Coil change without opening of medium circuit, coil can be mounted 4 x 90°
  • High operating safety through the use of high quality materials and 100% final testing of the products

Technical data

  • Type dispense valve
  • Construction single-chamber valve inlet ninety degree to outlet
  • Ways 2/2-way
  • mode of operation direct acting
  • Function NC (normally closed)
  • Fitting position with coil pointing upwards
  • Media Cold and heated potable water and physically and chemically similar media
  • T-Medium 98 °C max.
  • T-Ambient 70 °C (158 °F) max.
  • DN 14,0 mm
  • Pressure range 0 - 60 mbar
  • Coil type MS 6
  • Coil Type MS 24
  •   MS 25
  • Nominal voltage 230 V AC 50/60 Hz
  •   110 V AC 50/60 Hz
  •   24 V AC 50/60 Hz
  •   24 V DC
  •   other voltages on request
  • Voltage tolerance +10% -15%
  • Duty cycle AC 50% (cycle 1 min)
  • Nominal power 9,5 W 16,4 VA (AC only)
  • Protection type IP 00
  •   higher IP-classes on request
  • Coil connections Flat Tabs 6,3 x 0,8 mm according to EN 60529 (IP 00)
  •   Other Connections on Request
  • Insulation class H according to EN 60730
  • Protection class I according to EN 60730
  •   (for incorporation in class I)

Materials

  • Valve body PSU
  • Valve seat PTFE
  • Plunger Guide Stainless steel
  • Plunger Stainless steel
  • Membrane and sealings VMQ
  • Coil coating PBT, PET or epoxy resin
Technical inquiry
Technical inquiry

A. u. K. Müller GmbH & Co. KG

Dresdener Straße 162
D - 40595 Düsseldorf 

Telefon: +49 211 73 91-0
Telefax: +49 211 73 91-281

E-Mail: info(at)akmueller.de

 

A.K. Muller (UK) Ltd.
Unit 4, Brookside Business Park
Brookside Avenue, Rustington
GB - West Sussex BN16 3LP

Tel: +44 1903 788888
Fax:+44 1903 785817

E-Mail: valves(at)akmuller.co.uk

 

A.K. Müller France
10 Avenue du Gué Langlois
Z.A.E du Gué Langlois
F-77600  Bussy Saint Martin

Telefon: +33 1 64 62 95 14
Telefax: +33 1 64 62 95 12

E-Mail: info(at)akmuller.fr

 

 

A. u. K. Müller Shanghai
Rm25A, Huadu Mansion,
Zhangyang Rd. 838,
Shanghai, 200122, China

Telefon: +86 21 50 34 23 61
Telefax:  +86 21 58 20 42 12

E-Mail: info@akmueller.de

 

 

©2021 Copyright A. u. K. Müller GmbH & Co. KG